Cell Type |
P type Mono-crystalline
|
Module Size |
2148x1134x4(9) mm
|
Module Thickness |
4.0(9)mm
|
Module Weight |
10.5(10.2)kg
|
Junction box |
IP 68, 3 bypass diodes
|
Packing |
60pcs/pallet, 480pcs / 20GP, 1080pcs / 40HQ
|
Product Description
DAS-LH132PA 455W~475W | |||||
Electrical Parameters (STC * ) | |||||
Nominal Max. Power(Pmax/W) | 455 | 460 | 465 | 470 | 475 |
Open Circuit Voltage(Voc/V) | 45.50 | 45.65 | 45.79 | 45.93 | 46.06 |
Short Circuit Current(Isc/A) | 12.67 | 12.76 | 12.85 | 12.93 | 13.02 |
Operating Voltage(Vmp/V) | 37.72 | 37.87 | 38.01 | 38.15 | 38.28 |
Operating Current(Imp/A) | 12.06 | 12.15 | 12.24 | 12.32 | 12.41 |
Efficiency(%) | 19.9 | 20.1 | 20.3 | 20.6 | 20.8 |
STC * : Irradiance = 1000 W/m², Cell Temperature = 25°C, AM = 1.5 Test condition is based on the front side | |||||
Electrical Parameters (NMOT * ) | |||||
Nominal Max. Power(Pmax/W) | 341.7 | 345.5 | 349.2 | 353.0 | 356.7 |
Open Circuit Voltage(Voc/V) | 43.35 | 43.50 | 43.63 | 43.76 | 43.89 |
Short Circuit Current(Isc/A) | 10.21 | 10.28 | 10.35 | 10.42 | 10.49 |
Operating Voltage(Vmp/V) | 35.16 | 35.3 | 35.43 | 35.57 | 35.69 |
Operating Current(Imp/A) | 9.72 | 9.79 | 9.86 | 9.93 | 9.99 |
NMOT *: Irradiance = 800 W/m², Ambient Temperature = 20°C, AM = 1.5,Wind Speed = 1 m/s Test condition is based on the front side |
l Weight: 4 KG/m2 , Lighter than other modules,
l 192W/m2, HDM technology
l Warranty: 25 years linear power degradation warranty
Soft and graceful extension of light engergy
l Softer: fitting the curved surfaces better
l Thinner: 4 mm in thickness
l Max.bending degree: 30°
Installation
(don't need mounting brackets any more)
l Installation cost : decreased by 50%
l Easy and quick installation: one module could be installed in 40 seconds by 2 workers, cost reduction is more than 70%
l Installtion Ways :
(a) Double sided adhesive Tape
(b) Silicone adhesive